COBRA 1/10 FULLY PRINTABLE R/C CAR

This is my Cobra 1/10 100% printable car project, on EL-01 Chassis. all parts are print in place.

!!!!ATTENTION ONLY FITS 7.4V 2200 mAmp 105mm Long Lipo Battery!!!

I used PLA+ for hard parts, TPU standard for flexible one and TPU Air for tyre,
also Shock arsorber are printable, but if you like it's possible to mount normal shock absorber in the front for more aggressive look.
you will need also
M3 Philips type srew 12mm and 16mm long
M3 Hexagonal Head screw 12mm and 30mm
Coupoling Joint D12L18 Hexagonal 12mm Hole Diam. 3.17
M3 self-locking nuts
M4 Countersunk flat head 12mm long
540 motor 27 T
8x12x3.5 Bearngs
12x18x4 Bearings
LEDs (for rear lamp)
Resistor (for rear lamp)
Wires (for rear lamp)

All building detail are notable in the videos.

Tutorial video for builing:

EL-01 Chassis
https://www.youtube.com/watch?v=RgjiTLIJSj0&t=8s

Shell
https://youtu.be/CagREOWP-hE?is=bzuLRKb3MS5aFY96

3D PRINTING SETTINGS
All Settings are in text file format into the parts folder
!!PRINT ALL PARTS WITH 0.2 MM LAYERS!!

PLEASE SEE MY MODEL ON CULTS3D:
https://cults3d.com/en/3d-model/game/cobra-1-10-100-printable-car