Salt Shaker Cap with 48-400 Threads

I broke the cap on my Mason Jar type salt shaker.

In the Fusion F3D file, you can change the only user parameter, CapHoleSize, to increase or decrease the size of the holes in the cap.
The original holes let out too much salt so I decreased the hole size of the original from over 2mm to 1.75mm.

The threads are basically 48-400, but I used the old cap dimensions to make it nearly exactly the same as the original therefore the threads aren't exactly to 48-400 spec.

There is an extrude inside the perimeter of the top of the cap, that is just to give it a little bit of character.

This was made with white PLA on a Bambu P1S of which there is an OrcaSlicer 3MF file provided along with the F3D, STL, and STEP files.