Hot Rod Galloping Goose

I wanted a Galloping Goose for my ho train set and was unable to find one so I decided to create one. I decided to create one that did not exist and wanted it to look like someone just hammered it together in their garage. I took parts from the 2ft Overland 34' RPO and the Vintage Railcar (by BouncyMonkey) as well as a few of mi own and merged them to make it. My 1st one is DC , I used a Tenshodo 5016 for my drive since it could be converted to DCC. My 2nd unit will be the same but I will use a https://soundtraxx.com/products/tsunami2-digital-sound-decoders/tsu-n18/ Baldwin and others, small cube speaker with baffle and 402 LED lights (since these are the smallest ones I have found). I included 2 grill options, one with a place to mount LED's and a non-LED version. I also have to figure out interior lighting. This is still a work in progress and will be updated as additions are made.

I have included a few parts from the original models that I did not use but others may choose to use.

Note : the front axle mount must be glued to the front section.

I found a problem with the chassis and the drive, so I added an updated chassis also the headlight mount was a little flimsy when printed on my FDM printer, so I also added an updated LED grill. I kept the original parts here for those that might want to use them or those that want to do further customization.

If anyone has any suggestions or thoughts, please let me know.