Hinge for the Front Door of the Lulzbot Enclosure

Nice simple hinge for the acrylic door of my Lulzbot Mini enclosure. Uses two M3 machine screws on a 30mm x 18mm centers. Hinge uses Stress relieving washers (http://www.thingiverse.com/thing:755320) on the back side to provide a forgiving mount to the 3mm Acrylic door and frame. Hinge is designed to used either a Long M3 machine screw or a short length of 3mm filament as the hinge pin.
I've updated this thing, to make the hinge a little more robust (http://www.thingiverse.com/thing:772303) if you're interested or

If you are interested in an entire add-on kit to enclose your Lulzbot Mini, Ive put together a kit that includes these hinges and lasercut acrylic panels. You can check it out at: http://drazzticaction.com/products-page-2/3dprinters/ or http://www.ebay.com/itm/Add-on-Enclosure-for-Lulzbot-Mini-3D-Printer-/291446076488?pt=LH_DefaultDomain_0&hash=item43db8a3448