Blood Bowl dugout - Pt 2

This thing was made with Tinkercad. Edit it online https://www.tinkercad.com/things/2VWzu7tMR38

Used OpenForge Dungeon parts. I raised the floor tiles and arranged walls to suit.

Needs a bit of cleaning to fit - note gap between part 1 and 2. (Will probably file/sand it down to close the gap.)

*To go with Blood Bowl dugout - Pt 1.

(Part 1 is Reserves, Part 2 is for KO and Injured/Dead)

Update notes for converting to 2016 edition
(*This is sized for 2nd edition board. Would need to be re-sized for latest edition.)

The 2nd edition Blood Bowl squares are 25mm x 25mm.
The most recent 2016 edition has 34mm x 34mm squares.

So to scale up you'd need to print at 136% (1.36 x 25mm = 34mm).

(Note I haven't had access to a 3d printer for a while so I can't do a test print for larger size.)