Playpi a Raspberry pi 2 case for retropie

Update 2015-05-03 B

The new overclock base is up.
It is done so the cool air from the fan should circulate on the top and bottom of the raspberry pi 2 and then exit on the side with the cable inputs.

Update 2015-05-03

Cleaned up and decreased print times on the top pieces.
if you got errors on the first use these instead.
The one with fan extension is for my overclock mod to have a small 40mm 5v fan to circulate the air on the top and bottom of the pie to allowe a modest overclock on the raspberry pi 2 when it is in the case.
Iam working on the base piece.
The default base piece v2 is simply also only cleaned up and fixed to have a smaller print time , so if you printed the orginal no nead to download and print this.

Published 2015-05-02

I did not want a plain squared case so I remixed a cool one I found here on thingiverse.
Its intended for retro pie builds but its up to you.
Its done in tinkercad the free cad prg.
Video.
https://www.youtube.com/watch?v=hkyOuK_MzQQ