July 13, 2015
Description
Since it was not easy for a pal of mine to find a bleed block for the Formula RX disk brakes here in Germany, I designed and printed one myself. The bleed block is necessary when you bleed your brakes to hold the brake pistons in place so that they don't get pushed out of the brake body.
The gallery shows the V1 version that fits quite nicely into the brake block. Version V2 has a little wider hole for the fixation screw to fit more easily as well as it is rounder on the bottom to match the brake body shape - an aesthetic thing...
Print it with three to four top/bottom layers and an infill of above 10% to withstand the pressure forces of the brake's pistons. When using a honeycomb or rectangular infill pattern it is not necessary to have a too dense infill. I've printed the bleed block with PLA.
Please report any issues in dimensions and shape so I can optimize the bleed block further.
Please also take a look at my other designs, printer parts, and tools.
If you like to support me and my work, please consider following me on:
Sending a tip over Thingiverse is much appreciated and will provide me with coffee to stay productive.
Please also consider buying your next gear via one of the affiliate links found inside my Thingiverse project pages or directly over the following links.
License:
Creative Commons - Attribution - Non-Commercial
MartinMajewski
