Tinkerine Ditto Pro knob detent

This is an upgrade for the Tinkerine Ditto Pro. The control knob on it really should have a detent so that you can easily select options in the menu; this is a quick fix I designed while working in a school makerspace.

The ring is intended to be glued to the lighted bezel ring around the knob and the detent wheel goes on the potentiometer shaft. If I remember correctly, the flat on the ring should at the top.

You will have to remove the control knob to install this. There is a set screw on the knob, so you should loosen that if it isn't already loose.

This is a fairly imperfect solution - what you should really do is replace the pot with one with detents built in.

Warning: messing with your printer is done at your own risk.