Budaschnozzle to E3Dv6 Adapter

Parts to mechanically couple an E3Dv6 hot end in place of your stock Budaschnozzle hot end for a Lulzbot TAZ printer. [Now you can print with 1.75mm filament!]

Note: If you update your TAZ to handle the Hexagon extruder (namely, adding a fan cable and upgrading the firmware), you have all the wires you need. Plus the Hexagon and the E3Dv6 both use the same thermister. Now I'm able to swap back and forth between Hexagon and E3Dv6 with a little plugging/unplugging, slicer profiles, and of course z-height home tuning.