Evolv DNA200 Box Mod - Box Battery - Dual 18650 (NO LiPo)

This box mod work with Evolv DNA200 and two 18650.
The power is limited to 133w and u've to set 2S instead 3S in eScribe software.

This box mod is not easy to assemble.
Please be carefull and read FULL DNA200 datasheet before starting the job.
Choose accurately wire and battery contact.

I attach some version of the body with different connector / drip cap hole and different top look (flat or not flat).

Use the kind of battery contact u want. In my box mod i used:

• spring from http://www.svapamo.it/;
• drip cap easy flat 22 from http://www.svapiamo.com/
• positive battery contact are Copper Sear Cap 1/4
• wire 16 gauge (silicon wire);
• magnets 3x2 and 3x1 (only for front panel).

Assembly steps in instructions.

If u need some different hole or different push button height simple ask me for it.

Youtube video: https://www.youtube.com/watch?v=sUWxXvb31AM
Post in my blog: http://www.esigblog.com/evolv-dna200-box-mod-box-battery-stampante-3d
Good luck !

Update 29/08/2015
Re-upload all the body parts cause an error in STL.