It is adjustable pasta cutter. It can make different size of noodle or pasta, and only change you need to do is changing the spacer size.
I printed mine at 0.1mm resolution, 80% filling, 3 layers wall/bottom/top, G-code was generated by Cura Engine. Tested, works well enough.
It includes
- blade: 1mm thick blade, with reinforcement in the middle.
- two pieces of shaft : I need 10cm shaft, however not sure about the print will stick to bed well enough for a tall and skinny part, I decided to cut to half length to 5cm each.
- handle: basically hollow inside with beam support inside.
- handle cap: fit at the end of handle to close the hollow.
5 spacer: I had the choice to combine blade and spacer. However, I may want different thickness of my noodle. With spacer, I only need to print another set of spacer, instead of changing all the blades.
Enjoy it~!
Barbari
