1/18 8x8 Functional Scale Garage Door

Install the ultimate garage door in your scale garage! Control it manually or power it with your choice of electronics. Full function potential.

View the prototype in action https://www.facebook.com/frozenrc/videos/651742495244856/

PLEASE NOTE THAT THE DOOR IS DESIGNED TO COVER A 200 X 200 MM OPENING. Any scaling of the door will change the required hardware and cannot be guarantied to work.

Door panels are customizable, from clear glass to panels with windows. 4 different panel inserts included or create your own custom panel inserts.
Assembly Instructions included.

THIS MODEL IS LICENSED TO YOU FOR PERSONAL USE ONLY. YOU ARE NOT PERMITTED TO SELL PRINTS BASED ON THIS MODEL.

The following hardware is required to complete.
• Electronics
o Standard 1/10th servo modified for continuous rotation (Google it)
o Control, this is up to you, RC, Manual, or even Microprocessor controlled.
• 1M of GT2 6MM wide timing belt.
• 2mm Button Head Screws and Nuts (not nylock nuts)
o Suggested https://www.amazon.ca/gp/product/B01MU4OH6L
o Suggested screw set requires a 1.5 or 1.3mm hex driver. Not 100% sure I made do with modified 1mm bit
• 2mm Self Tapping Screws
o Suggested https://www.amazon.ca/gp/product/B076ZV44GN
• 2 x 3x7x3 Metric Bearings for Opener Idler Pulley