75 mm Electric Ducted Fan unit for LX F-35

I struggled to get my 70 mm LX (also known as Lanxiang/Bananahobby) F-35 flying well with 70 mm fans. The intakes and exhaust were big enough to handle more air so I designed a 75 mm fan for it instead. It works really well. It's not fast but performs well with good climb.

I use the fan with a gold and black colored QF 2827 3500 kv motor and 4S lipo. I think it draws a bit more than 80 A on a full charge. This motor is available in 2600 kv for 6S but I haven't tried that myself. Grind a divet on the motor shaft for the grub screw to sit in so that it can't just slide off the shaft if it becomes slightly loose.

To balance my F-35 with a light battery I made the parts so that the fan itself sits in front of the normal mounting location in the LX F-35. Stack Fanhousing04 on top of Fanhousing05 and glue together for use in the LX F-35. Fanhousing07 is a generic housing for use in other planes.

Video of the plane flying:
https://youtu.be/EBGJEyr9wqg

Bill Of Materials (may have affiliate links):
2x m3x10 mm grub screw for mounting the fan.
2x m3x8 mm countersunk screws for mounting the motor.
3500 kv 2827 motor (for 4S lipos). I use this motor: https://ebay.us/kV8v5o

Fanhousing04-75mm.STL - Forward housing with bell mouth intake for the LX F-35.
Fanhousing05-75mm.STL - Aft housing for the LX-35 with mounting lugs.
Fanhousing06-75mm.STL - Motor mounting plate for the EDF housing.
Fanhousing07-75mm.STL - Generic housing for universal use (not F-35) with mounting lugs.
EDF08-75mm-low.STL - Low pitch fan that I used with my setup.
EDF09-75mm-low.STL - High pitch fan for experimentation.