AMOEBA Striker AR mag adaptor

Hello there!

Following some requests on the Striker Facebook group, I decided to upload the STL of the mag adaptor.

Wait, you said I can put an AR-15 magazine in my striker?

Basically, yes! The shell is taking the overal dimensions of the original as01/02/03 mag, but it's extended to fit a short M4 midcap.

But, tell me why?

Honestly, I choosed the striker because of its size and weight. It's a pocket bolt action rifle, that can perfectly be used in most of the games. Of course, it has some cons like the small air volume, but with an as02 you're pretty good if you keep the stock barrel length! Reloading is boring, carrying extra mags too, so why wouldn't you use a damn big 110 rounds mag (depending on the midcap you use)? It least the whole day and maybe more for the most accurate of you ;)

Step by step installation :

-Print the adaptor

Buy the midcaps if you don't have it (the midcaps I used are the followings : https://www.taiwangun.com/fr/chargeurs-midcap-aeg/chargeur-acier-110-billes-ar15-m4-black-double-bell )

NOTE : The adaptor is made to fit other mags, as It's few mm longer than the mags I used.

-Remove the steel shell of those poor cheap mags

-Cut/Sand/Remove all the unnecessary things from the magazine, like small plastic guides, or other things.

-Insert the mag in the adaptor

-Use a FHC M3 screw to secure the mag (length depend on which brand you'll use)

TIPS : If, like me, you choose to go for the mag I linked on top, you'll see there's a small gap. Fil it by using sticky foam or similar soft material on the BACK of the mag. The front (where the BBs exit, need to be completely forward).

Hope you'll enjoy this new mod for your striker!

Cheers and thanks if you choose to purchase my models, it helps me a lot to continue!