Flanders Pattern tracks

Alternate tracks for Imperial Vehicles.

15mm Tracks are 50% wider (5mm) than those included with the plastic kits. This increases the overall width of the model by 10mm. Internal spacers are included to accommodate the wider tracks.

10mm Tracks do not increase the width of the model, but slightly increase the overall height. Tracks are bulkier than the standard plastic kit; some accessories or other aftermarket parts may not fit.

Simple to use replacement treads for your tank conversion project. Can be ordered to fit the lemon rust (both Heresy and 4TK version) or khimera chassis. These are intended to work with the current plastic kits. It is untested with the older 90's kit, but it may work (let me know if it does!) Parts are a one-for-one replacement for plastic treads. There are also spacers used to widen the section of the hull where the tracks attach, as required. Some other accessories or parts may not be compatible (like track guards)

Lemon Rust, 4TK kit contains:

8x spacers to extend the width of tracks (12.5mm and 15mm only)
10x single tracks (replaces parts 'L6' and 'R6' from the plastic kit)
2x four-track sections (replaces parts 'L5' and 'R5' from the plastic kit)
2x six-track sections (replaces parts 'L4' and 'R4' from the plastic kit)
2x twelve-track sections (replaces parts 'L3' and 'R3' from the plastic kit)
2x compressed eight-track sections (replaces parts 'L1' and 'R1' from the plastic kit)
2x stretched eight-track sections (replaces parts 'L2' and 'R2' from the plastic kit)

Lemon Rust, Solar Aux kit contains:

8x spacers (4 types, 2ea) to extend the width of tracks (12.5mm and 15mm only)
10x single tracks (replaces part 'B7' from the plastic kit)
2x four-track sections (replaces part 'B8' from the plastic kit)
2x six-track sections (replaces part 'B6' from the plastic kit)
2x twelve-track sections (replaces part 'B5' from the plastic kit)
2x compressed eight-track sections (replaces part 'B9' from the plastic kit)
2x stretched eight-track sections (replaces part 'B10' from the plastic kit)

Khimera Kit contains:

8x spacer (2 types, 4ea) to extend the width of tracks (12.5mm and 15mm only)
12x single tracks
4x two-track sections
4x four-track sections
4x twelve-track sections

Mal-K-Door Kit contains:

1x Front-left spacer
1x Front-right spacer
4x bottom spacers 
2x twelve-track top sections (replaces part B13)
2x twelve-track rear sections (replaces part B14)
2x ten-track and nine-track sections (combine to replace B12)
2x eight-track sections (replace part B11)
2x three-track sections (replace part B15)
12x single tracks (replace part B10)

Lore:
The agro-world of Flanders orbits the same binary star system as the Renault Factory world. During the Apostasy of Kipkean, Flanders became the site of extensive fighting, quickly devolving into brutal trench warfare. The fields of Flanders shortly became churned to a thick mud. The standard pattern of tracks fitting on Imperial Armor was found inadequate. On Renault, a wider pattern of track was created to better navigate the difficult conditions of Flanders. STCs for many Imperial vehicles were modified to incorporate the new Flanders-pattern tracks.

To this day, the factory world of Renault still produces vehicles with wider tracks. These variations are prized for their improved mobility.

These are paid files. Do not distribute.
copyright W. Culpepper 2024
[email protected]