FREE FILE FRIDAY Simple V8 Distributor

Thank you so much for your support!
(not every Friday, not every file :P)

If you enjoy this file please don't hesitate
to let people know where you found it ;)

These parts are sized and suited for 1/24
and 1/25 scale model cars, with resin printing
in mind.

Simple V8 distributor with ignition wire holes all the way through for easy cleaning and gluing. Just put the 9 wires in so they come out the bottom, dip them in glue and press them up through the holes for a good bond.

The holes are approx 0.9mm in diameter so plenty of room for glue and paint if you're using 0.3mm wire.