Rotterdam Düwag Tram in H0 (double-articulated)

Model of a Rotterdam double-articulated Dûwag tram in scale H0 (1:87).

A traction unit, e.g. from Halling - with 9 mm wheel diameter - and a pantograph, must be added, but a dummy wheel system is included in the files:
Wheel_holder_front.stl
Wheel_holder_back.stl

Due to correct scale in width, the model is made without bogies. Therefore, the model is best suited to the radius of tracks of at least Piko R2 - r = 422 mm.
If a smaller radius is desired, the files below can be used to connect the sections:
Connector_from_front_or_back_to_middle_house_long_x2.stl
Connector_from_middle_house_to_body_middle_long_x2.stl

If the model is to be equipped with 3rd party bogies, the width of the parts must be expanded in the slicer before printing.

The model is assembled in the middle with the included connectors to front / middle / back body and locked with the locking plate. Use the files to connect the sections:
Connector_from_front_or_back_to_middle_house_x2.stl
Connector_from_middle_house_to_body_middle_x2

Use 3 mm bolts and nuts for assembly.

See example in video: https://youtu.be/ORYcIDuSwKU