Scale Wire wheels for RC touring cars

I designed scale looking wire wheels for my Ferrari 250 GTO (from L&L Models) and HPI 26mm vintage tires. Should also fit other vintage tires with a tall sidewall.

Wirewheel01 was used on the front of my 250 GTO and Wirewheel02 was used on the back. Wirewheel02 has lower offset and gives a slightly wider track.
Wingnut01 is a three-armed knockoff nut. Press onto M4 nyloc nuts and add thin CA to secure.
Wingnut02 is a two-armed knockoff nut. Press onto M4 nyloc nuts and add thin CA to secure.
Wingnuttool01 and 02 is a tool to make tightening of the nuts easy.

Remove the outer support rings and inside support tower after printing.