/https://fbi.cults3d.com/uploaders/21070220/illustration-file/a79c2780-5b5e-47f8-b122-fae59b68878f/20250323_2222551.jpg&w=828&h=828&output=webp&q=100&n=40 "Beyblade Eraser Performance Tip 3D Printer File Image 1")
/https://fbi.cults3d.com/uploaders/21070220/illustration-file/9af0a7f3-72b6-477a-a860-3ac9081db225/Eraser_Performance_Tip.png&w=828&h=828&output=webp&q=100&n=40 "Beyblade Eraser Performance Tip 3D Printer File Image 2")
March 24, 2025
Description
I thought an eraser could work well as a rubber tip but it didn't turn out as well as I'd hoped.
This uses an eraser from a Ticonderoga NO.2 Pencil. Cut it from the base with a razor and slot it into the performance tip. make sure you slot it in with the rounded end facing outwards. A dot or two of super glue in the tip is recommended but not necessary.
License:
CC BY-SA - Attribution - Share alike
4,321
ScroffyToffee
