Summer 'Sicles Multi-Pack

PRIVATE USE ONLY⚠️

Hi I'm Kelly! 👋 I'm a dog mom and aspiring 3D designer! These files are my intellectual property and the files CANNOT be shared, remixed or sold in any way. A Commercial License is Required to legally sell physical prints of my designs. 👉HERE is a link to my commercial license options!

---

DESIGN DESCRIPTION ☀️🍡💖

Hi friends! Last Halloween, we designed our Spooky Pops pack, but we realized we’ve never actually shared any regular popsicles. Sooo today, we have a simple little popsicle pack to share! This set includes a hadnful of designs—some with more of a traditional popsicle vibe, and others leaning toward a dipped ice cream feel. Honestly, even after spending all sorts of time adding cute faces for you all I think the classic popsicle with no face is my fave! 😄

Hope you like them! ☀️🍡💖

This pack contains 5 unique base designs and 21 cap designs. The caps come in raised options where able. Each base comes in the standard 7mm, 3.5mm diameter and blank keychain configuration.

---

CLICKER INFORMATIONℹ️

Like most of my designs, this is a clicky design that requires a mechanical keyboard switch to make the clicky part. These models feature a universal base design which has been tested with many keyboard switches and 99% of them work! I have an up to date list of verified clickers with links you can find HERE. This design should be compatible with most MX style keyboard switches, however, the two metal contacts on the bottom of the switch must be clipped off flush (or folded over) to ensure the switch seats properly in the base (this is a destructive process).

---

LICENSING⚠️

This is a PRIVATE USE ONLY license.

Commercial License options available 👉HERE

Sharing, sub-licensing, selling, renting, hosting, transferring, distributing, modifying, or remixing of any of the digital files contained in this design is NOT ALLOWED.

---

PHOTO COLORS🎨

• Bambu Basic Pink PLA
• Bambu Basic Turquoise PLA
• Bambu Matte Chocolate PLA
• Elegoo While PLA
• Isanmate Latte Brown PLA

---

3D PRINT SETTINGS⚙️

Layer Height: 0.2mm (recommended)
External Perimeter: 0.33mm (recommended)
Scale: 100% (Everything is modeled with tight tolerances and should not need to be resized)
Orientation: Print the caps face down so you have a smooth surface for clicking! (recommended)

Note: I've found the best way to get the most crisp details on these clickers is to start with the smallest details first and work up from there. Here is the order I recommend after LOTS of trial and error:

• Small Detail (Eyes, Blush)
• Medium Details (Sprinkles, Dip)
• Everything Else (Base Colors)

⚠️WARNING⚠️ - This pack requires very good bed adhesion to ensure the best possible results for your finished clicker. It is recommended to clean your bed with soap and water before printing or whatever your specific printer manufacturer recommends for a deep bed clean!

---

Stay Pawsitive! 🐾

For model help or other questions, please contact us at [email protected]