The Crystal Maw

This is The Crystal Maw Dice Tower.
I wanted to create a new dice tower and, as always, wanted it to have a few tricks up its sleeve.
While there are quite a few skull-themed dice towers out there, I’m really happy with how this one turned out!

It’s completely multi-part, so no AMS is required here.
It’s split into two parts connected by magnets, and the back section includes a secret dice compartment where you can store your dice.
You’ll need eight 12mm x 2mm magnets for the skull parts.

The Crystal Island is optional but really adds a lot to the visual feel—I’m especially happy with how this part came out!

Printing:

Both skull parts require supports – I recommend tree/organic supports where needed.
All other parts do not require supports.
The back skull has two versions: Crystal and Non-Crystal. You can print the small crystal separately and glue it to the top, it adds a great finishing touch!
For the Crystal Base, pause the print mid-way to swap filament colors for the crystals.
Notes:
The Skull_Front has two versions:
One with smaller openings and one with larger.
This was part of my testing, but I decided to include both.
Use Skull_Front_Larger_Holes.stl if your dice are over 20mm in size (they probably are).

My Print Settings:
Layer Height: 0.2
Supports: Tree
Walls: 2
Infill: 5%

If you want to get access to all my models or sell my prints commercially, you can join my Thangs: https://thangs.com/designer/3DGeex

And a kind request, Please help supporting the work of all 3D artists! Do not sell or share digital files bought here and on other sites. Buying this model DOES NOT allow you to sell physical copies of it, It is for personal use only.
All my original designs are Copyright protected.

Check out my social media accounts to see what I'm doing next:
instagram.com/3dgeex
tiktok.com/@3dgeex
youtube.com/@3dgeex

Thanks, Michael - 3DGeex