Trunk Tappers Multi-Pack

PRIVATE USE ONLY⚠️

Hi I'm Kelly! 👋 I'm a dog mom and aspiring 3D designer! These files are my intellectual property and the files CANNOT be shared, remixed or sold in any way. A Commercial License is Required to legally sell physical prints of my designs. 👉HERE is a link to my commercial license options!

---

DESIGN DESCRIPTION 🐘🎊

Hi! We're keeping it simple today with a smaller set of elephant clicker variants. We originally designed them for a friend, but they turned out too sweet not to share with you all. We hope you enjoy them as much as we do!

This pack contains 3 unique base designs and 3 cap designs. Each base comes in the standard 7mm, 3.5mm diameter and blank keychain configuration.

---

CLICKER INFORMATIONℹ️

Like most of my designs, this is a clicky design that requires a mechanical keyboard switch to make the clicky part. These models feature a universal base design which has been tested with many keyboard switches and 99% of them work! I have an up to date list of verified clickers with links you can find HERE. This design should be compatible with most MX style keyboard switches, however, the two metal contacts on the bottom of the switch must be clipped off flush (or folded over) to ensure the switch seats properly in the base (this is a destructive process).

---

LICENSING⚠️

This is a PRIVATE USE ONLY license.

Commercial License options available 👉HERE

Sharing, sub-licensing, selling, renting, hosting, transferring, distributing, modifying, or remixing of any of the digital files contained in this design is NOT ALLOWED.

---

PHOTO COLORS🎨

• Overture Light Gray PLA
• Polyterra Watermelon PLA
• Overture Digital Blue PLA
• Hatchbox Light Purple PLA

---

3D PRINT SETTINGS⚙️

Layer Height: 0.2mm (recommended)
External Perimeter (Outer Wall): 0.33mm (recommended)
First Layer Extrusion Width (Initial Layer Line Width): 0.35mm (recommended)
Only one wall on first layer: True (recommended)
Scale: 100% (Everything is modeled with tight tolerances and should not need to be resized)
Orientation: Print the caps face up so you have a nice, textured surface

⚠️WARNING⚠️ - This pack requires very good bed adhesion to ensure the best possible results for your finished clicker. It is recommended to clean your bed with soap and water before printing or whatever your specific printer manufacturer recommends for a deep bed clean!

---

Stay Pawsitive! 🐾

For model help or other questions, please contact us at [email protected]