Two Lane Straight Track for Diecast Racing

This is a two lane straight track design compatible with:

[creation modular-180-fat-track-turn]

It is also compatible with crash racers using the included 2 lane track connector.

This listing will grant access to track models of different length and surface. If you would like to see a additional sizes/surfaces please let me know.

---

20° Uphill Addition
Added 20° UpHill Pack to compliment the downhill pack, these match the "old school" crash racers style track. Single "Mid" Ridge, Multi-Ridge and smooth available.

---

Update 2025
This is the 2025 straight track listing update!

• Straight Track pieces are now thicker and the distance between the connector slot and track floor is larger this uses a bit more filament but will make print quality increase. These thicker track pieces print much better with default slicer settings. And have much better bed adhesion.
• Fat Track V2 and 2 Lane V2 can be fastened together with the TrackClip.3mf (or zipties)
• Fat Track V2 Jump has been included.
• Fat Track V2 Checkered has been included.
• Jump, Checkered and FatTrack V2 include very small changes to geometry which can be used in slicers supporting multiple colors, you should likely print these flat to save on filament. These print fine in single color as well.
• TrackClip-RemovalTool.3mf can be used to aid in removal of TrackClips (if you have side/flush cutters those can actually be used to remove TrackClips as well.)
• 62mm and 24mm spacers are included in case you are using the pillar caps which have 80mm connector lengths. Connector slots have been set to 31mm each side.
• StepConnectors have been included to connect to previous versions of the track and other track types.
• Fat Track and Jump CutRoadLines should be printed vertically and can have colored filament pressed into the cut channel after printing is completed.

Update Previous

• Uploaded a single zip with the latest iteration of the 2 lane open track design "2Wide_OpenTrack.zip" this is a single download contains lengths 3, 4, 6, 8, 9, 12 and 18 (in inches) the connector rails do run along the entire length of the track which can help print stability with materials like PETG, but they do use more filament to print so I'm not removing the previous designs.
  Included:
• 6, 12 and 18 inch versions of most models
• 150mm and 250mm variants (others available on request but you can just scale them)
• special connector designed to hold these printed tracks snugly to adventure force track.
• 3 Bend/Jump type pieces that can launch cars or help transition between angles when used with the track pillars
• Track Bend Drops have been added (1/21/2026)

---

See it in Action
You can see the turn in action here which was printed in light blue/green apple PLA from IIIDMax.

A clip from an instructional video I created about the track can be seen here here.

License
If you would like to print and sell these straight pieces legally I have setup a patreon which will grant you a license as long as you are a member.