Rechargeable Unique Wobbly Design Desk Led Lamp

This is the rechargable version of this model : https://makerworld.com/en/models/760023#profileId-694604

Assembly:

1 ) Put the cob stip trough the hole from the side
 

2 ) Take the motor form the bambu kit and cut off the wires like this:

3 ) now solder the wire to the cob strip board (red to + and black to GND):

4 ) Connect all the parts togheter:

5 ) After making sure everything works fit all the parts inside, it's gonna take some time and require to push down the button:

6 ) Now it's time to put the lid on, it's a tight fit:

7 ) At this point add the acrylic tube, you can use a few drops of superglue but it's not necessary:

8 ) With a drop or two of superglue fit the cob led to the top cap:

9 ) Fit the cob strip inside the tube and close the lid:

Done! Your very unique lamp is ready to be used.

All parts needed are listed below.