Jack and Sally Valentine His/Her Bookmarks

A pair of Jack and Sally bookmarks with them inside a heart while making a heart with their hands. Keep one and give one to your wife, husband, lover, or even just a BFF to have a matching pair! Just add a bookmark tassel and you're all set! If you don't want the hole at the top, simply delete the negative cylinder in the slicer at the top of the bookmark. 

 

There are two print profiles. One is a simple black and white design that is a classic favorite, and the other is a color profile that can be changed with any mid color Basic PLA that will look great! The colors are set up for Jack as Cyan, and Sally as Red. Just added purple picture to replace red per request. Looks superb!) See attached pictures as an example. 

 

Scale up or down on X/Y axis only. DO NOT adjust Z height!

 

If you get “floating regions” warning, that can safely be ignored and does not required supports.

 

For manual color change:

 

Filaments Used: For Black and White
    PLA BambuLab Basic Black Transmission Distance: 0.6
    PLA BambuLab Basic Jade White Transmission Distance: 5
This print uses 2 unique filaments

Swap Instructions:
    Start with Black
    At layer #8 (0.72mm) swap to Jade White for the rest.

 

Filaments Used: For Color
    PLA BambuLab Basic Black Transmission Distance: 0.6
    PLA BambuLab Basic (Any Color) Transmission Distance: 8
    PLA BambuLab Basic Jade White Transmission Distance: 5
This print uses 3 unique filaments

Swap Instructions:
    Start with Black
    At layer #8 (0.72mm) swap to any color
    At layer #12 (1.04mm) swap to Jade White for the rest.

 

Boost MeIf you enjoy any of my prints, please consider a boost! Thank you!

 

For other fun Holiday and random prints, visit https://makerworld.com/en/@Hockey_Dad

 

 

 

Any questions or requests, please ask.

 

Please leave a review!