Paint Bucket Paint Mixer Cup

Boost MeIf you like these models please toss me a boost, thank you!!!

This is a paint bucket mod I made to add to my paint brush mix set.  They are mini paint buckets with a small pour assist on the inside of the bucket with working handles.  They fit perfectly in the paint brush mix set just like the normal mixing cups.  Because of the over hangs and no supports it seemed each print would have one little tiny string part usually around ¼ inch.  I just ripped it off and had no issues.

 

-Assembly-

 

There are little tabs on the end of the handles.  Since I chose to print them standing up with no supports the holes the handles go in to dont print exactly round, its a known slicer issue.  I just took something small n round and smoothed out the holes.  I had a small punch that worked perfect but I suspect a ball point pin or tooth pic would work just as well.  Try not to open it to much just make it rounded out.  They will kind of snap in when fitted correctly.  If you make it a bit to large dont worry since its offset once you turn the handle up it should hold perfectly.

 

They fit perfectly into the paint brush mix set for a total of 7.

 

Here is the Paint Brush Mixing Set https://makerworld.com/en/models/977904-paint-brush-mix-set#profileId-951039

 

A Larger version for Brushes and Paint Pens https://makerworld.com/en/models/1979534-paint-brush-mix-set-large?from=email_notification#profileId-2129254

 

A more simple mixing cup https://makerworld.com/en/models/977336-paint-mixing-cup#profileId-950364