Dan·Heng, Light Cone

This work is based on the method created by the author PEL3D and was made out of personal interest. There may not be any additional models in the future, so there’s no need to expect more.

This work consists of 6 plates along with a top and bottom piece, making a total of 8 parts. It can be printed using a single AMS.
 

NOTICE: Plates 2 and 3 have 5 colors each. A pause point is set before printing the fifth color, allowing you to change the color and continue printing. The detailed color sequences are as follows:

• Plate 2: Black - Dark Gray - Gray - Skin Tone - Sky Blue
• Plate 3: Black - Dark Gray - Sky Blue - Skin Tone - White
  For the remaining colors, print according to the configured color sequence.

Tips: Each plate has a base thickness of 1.6mm. Due to an error, Plates 1 and 2 are slightly thicker than intended. If you manually adjust and print using the STL files, you need to add negative components to ensure the base thickness is 1.6mm.

The additional colors will start stacking from a height of 1.8mm upwards.