Firefly - Honkai Star Rail (by sraoill)

This is a free model, provided by sraoill on cults3d.com. He has allowed me to share my fdm print profile on makerworld, as he is fully focussed on resin printing (https://cults3d.com/en/users/sraoill/comments#comment-answer-518825). 
You can find the original model here: https://cults3d.com/en/3d-model/art/firefly-honkai-star-rail.

! FDM printing is not the best choice for such intricate models, it is however the easiest and most affordable. The printed model will not be perfect and require post-processing !

The provided .3mf profile has been tweaked by trial & error to provide a reliable and acceptable end result. Front-facing geometry has been priotized, as well as the success rate of the print.
It is in 150% scale to the original model, as i have found that small details like the fingers and clothing accessories dont have the minimum necessary resolution with a smaller scale. This results in the following dimensions: 165mm high, ~65mm diameter.
You will need to do ~30min of processing to remove supports, clean up and glue the print. I reccomend using a utility knife and when using silk filament: a hot air gun.

I dont recommend printing with silk and/or muli-color filament as these make it harder to print, as well as harder to post process them. If you cut multi-color filament the surface wont be a uniform color anymore, as the other colors will appear. When printing with silk filament, i have found the supports quite hard to remove, maybe more distance of support - object would help.

The white firefly figure is printed with Polymaker Polyterra Matte White, the tricolor one is printed with Eryone Tricolor Silk.
 

If you have printed the model, please share it in the comments! :)

(Any error/warning about the model having too much detail and needing to be simplified can be ignored. Processing will take a bit longer, but the high poly count is necessary for a complex model, like firefly)