1:35 Perfectly assembled Realistic Railways

1:35 Perfectly assembled Realistic Railways for train diorama mania!
 

1:35 European gauge rail track
Create a great diorama with this great vintage European train track!
You'll feel like you're assembling a Gunpla.
The components are very small, but they are assembled perfectly. And Easy & Simple. 

I recommend that you not change the 0.16 mm height of the printer setting. This is because the height of the runner is set to 0.16 mm, so the runner part should only be printed with one layer. The filament uses only 36 grams.

parts
Rail x2, sleeper x11, rail clip x22, rail joint x2
Specifications
SCALE - 1:35
Rail Width - Internal diameter 40 mm, track center-to-center distance 42 mm
Rail Length - 242 mm
Slipper Length - 70 mm
Rail Height - 12 mm

Each part is separate, so much more realistic modeling is possible!
Glue is not needed because it assembles perfectly without support. (A little bit of glue makes it stronger, but you can lose the advantage of being able to assemble/decompose at any time.)

If you're uncomfortable with a runner, use a version without a runner. (If you're confident in settling down lol)

• I used PETG, but if you use PLA, You can get a much cleaner output. But be careful because the parts are small and can break!