Dewalt Planer Dust Hose Bracket

This attachment for the DEWALT 735 planer will hold a 2.5 or 4 inch dust hose off to either side of the planer, keeping it out of the way during operation.  It mounts to the existing screw holes on the planer using 2 M5x16 screws and M5 or M6 washers.  Take care not to over-tighten the screws or you may damage the part.  This improved version is stronger with less flex.  Does not require supports to print.  I recommend printing with 4 walls and 15% gyroid infill.

Update V3 - 6/26/25  Strengthened the attachment points and enlarged hole to allow for up to an M6 Washer - Use of a washer is highly recommended