Flush Fit Dual Anti Vibration Feet

I wasn't satisfied with the standard Bambu Lab anti-vibration feet, and I couldn't find any replacements that I liked…. so I made my own. 

 

These are dual feet, so they utilize all 8 of the anti vibration feet that come in the pack from Bambu.

 

I designed the feet holders to be as low profile as possible along with being flush fit. (The vibration feet already add a bit of height to the printer, and I didn't want to make it any taller. 

 

I did not calibrate my printers after I installed the feet, and my prints look the same, but if you see print quality issues, I would run the calibration again with the new feet on.

 

PLEASE NOTE: There are two different holders, a set for the front left and back right of the printer and a set for the front right and back left of the printer. All of the holders you need are on one plate in bambu studio.  Just hit print and you should be good to go.

 

Will only work with the new anti-vibration feet: https://us.store.bambulab.com/products/anti-vibration-feet 

 

Boost MeIf my design helped you out , I would be extremely grateful for boost. 🙏 It helps me continue to make more free designs!  Thank you!