Gopro Hero 8 JB QAV S2 mount

This is a 25 Degree mount for a gopro hero 8 black to mount to a Josh Bardwell edition QAV S2 frame. I have printed it in Overture TPU 95A and Bambulabs AMS TPU 65D. The 95A works great but does not print perfect and you will need to cut off the supports. The 65D prints extremely well but is a bit too brittle for crashes and usually breaks. The 65D also has very little give so to get your gopro out you have to cut the case. If you can get your hands on some TPU with a hardness rating between those two it would probably be perfect but for now I will be using the 95A. 

There is a 1% larger version if you find the fit to be a bit too snug for your gopro. 

To mount it you can reuse the bolts your frame already has but I would recommend bolts 1-2mm longer than what it comes with. Don't overtighten as it will cause the TPU rip sooner.