DeWalt DCE100B Blower Holder Mount 20V Bracket

Holder designed to grab the DeWalt DCE-100 cordless compact blower 20V Max XR (Called 18V in some areas). 

Read the description carefully to ensure this mount is right for your application.

 

• Fits the DCE-100. Does not fit for : Amazon knockoffs, DCBL722, etc. Maybe it fits the DCV100 (not tested)
• Review the dimensions to ensure your tool variant will match the holder.
• Your blower may not hang at a perfect 90° vertical. This is not caused by my holder design, this caused by the tool center of mass not being perfectly centered at the handle.  So please, do not downrate the model for this.
• Screw holes in the mount are ⌀5.5mm. They are designed for #8-us screws (metric equivalent is 4.17mm).  Screw pockets are designed for flat bottom head screws. The screws must snug the surface of the pockets.  Do not use "cone" or "tapered" screws.
• Do not force larger diameter screws in the holes, this will damage your part. Screws should not thread in the plastic, they should grab the substrate only. 
• The model includes 4 holes :  2 middle ones for "beam" mount and 2 sides holes for a larger fat surface like plywood.  A typical #8-us screw has a shear holding strength of around 48 pounds (can vary based on factors like the screw's length, thread profile, and the material it's being screwed into).
• Battery will fit in the holder, but shall be removed as per the DW instructions.
• Select the proper material for printing : PETG, ABS, ASA, etc. all have specific material properties, so choose the proper material for your application.

Printing:  No supports needed, just print and use.  Profile is for 0.2mm layers type "strong" in PETG. You will see in the print profile some "yellow" objects over the part.  Theses shapes will not be printed, they are "modifiers" only.  Modifiers are used to adjust slicer parameters in specific locations of the part to improve properties, like infill while not wasting plastic in areas where infill is not significant.

 

Boost MeLike my holder, great way to say thanks is sending a BOOST, it's FREE !

 

Licence and terms of use :

When you download the files, you understand and agree that this content is licensed under a Standard Digital File License.

You can : 

(✔) Personal use : Download the digital file(s) for free and print 3D parts from the digital file(s) for your own use.

You cannot :

(X) Sell parts : manufactured from the digital file(s) or any derivative of the digital file(s), no matter how the parts are made, how many parts are made.  This also prohibits you from selling parts made from the Digital file(s) on sites such as eBay, Etsy, FB marketplace or any other location. 

(X) Share the digital file(s) or resell them. 

 

Liability disclaimer and use:

3D printed parts have limitations and may fail. For static applications only (ex. not for use in a trailer or vehicule). Use a load bearing safety leach to hold the tool with a separate fastener and hook able to hold the weight of the tool. Tool guards, if required shall be used. By downloading the digital file(s) and making a 3D printed derivative object from it, you agree that you're doing it at your own risk and understand the limitations of 3D printed parts.  The digital file(s) are not a product and the design do not give any express or implied warranty that, any product made from the digital file(s), will work or perform in a certain way.