VW/Audi EA888 2.0T (Mk6 GTI) 76mm MAF Housing

3D-Printed 76mm MAF Housing for VW/Audi EA888 (Mk6 GTI & Similar)

Upgrade your VW/Audi EA888 2.0T intake setup with this 3D-printed 76mm MAF housing. It’s approximately 10% larger than the factory diameter (~73mm), offering increased airflow while staying near most ECUs’ adaptive range. Although many setups will adapt on their own, a custom or updated tune is still recommended for optimum performance.

Note: This is not a direct bolt-on part. You’ll need additional silicone couplers or piping to fit it correctly into your intake system.

Key Features

• Designed for EA888 2.0T Engines (Mk6 GTI & others using the same MAF style)
• 76mm Diameter (~10% larger than stock)
• Customizable: Need a different diameter? The design can be tweaked to match your specific airflow needs.
• Tuning Recommended: While 76mm usually works with minor or no changes, larger diameters may require recalibration to maintain proper fueling.

Ensure you verify fitment for your specific model and prepare any additional connectors/couplers before printing. If you’re increasing diameter substantially beyond 76mm, expect to adjust your tune accordingly.