Outlet Shelf for Kasa Pan/Tilt Camera

This is an outlet shelf for Kasa Pan/Tilt Camera with built in cord management.  Prints in 3 parts: 

1)the outlet cover - after printing you can remove your outlet cover and replace with this one in its place using the same screw

2) centering plug - fits into the shelf and the bottom of the camera to keep it in the center

3) Cable management (optional) - mine came with a super long cable that can be wrapped inside this part and screwed into the bottom of the centering plug to give it a more polished look.  You could also just get a shorter cable and skip using this part if preferred.  I would advise test screwing these 2 parts together and apart a few times before you put it together with cables.  The threads may be tight in the beginning but will smooth out with the first uses.

 

The camera I have is this one ( https://amzn.to/464sRLT ).  I like it for ease of setup and not needing a subscription.

 

Legal information:

Standard switch covers are generally fire-resistant, whereas regular PLA is not. Please be aware that while the risk of an electrical fire is low, it is never completely eliminated. You are responsible for your own safety, as am I. Use this information as you see fit, but I cannot be held accountable for any potential damage to you, others, or your property. The installation of a plastic wall outlet cover is done at your own risk.

 

*As an Amazon Associate I earn from qualifying purchases

Boost MeBoost if you like it....comment if you want to make changes