This is a modular system which can be expanded as you prefer. If you have multiple monitors it can be very useful.
Each stand is provided also with possibility to add a drawer.
19/02/2025: updated profile “Multi-Monitor Lifter v24 - three stands with drawers”: modified only joint tolerances (you can print only new joint in case you already printed all parts).
13/02/2025: Added also a profile for printing the Rotating Plate.
Dimension of single plane: 265 L x 226 D x 120mm H
Example of composition:
How to assembly it:
Drawer
Stand
Leg
Foot
End
Angular DX
Angular SX
Joint (need for Angulars)
Put reversed the Stand, Angular and ends on a table. Insert the Leg in the middle and shift to the front or rear. This operation will connect the parts together. Insert and shift the foot on the leg as above picture.If you use the angulars you need also to print and insert the joint as above.
NOTE in case you want to add the Rotating plate then you need to print the stand with the hole provided on the profile “Rotating plate..”.
SimonMakerForge
