Fallout N99 10mm Pistol

This is a model from the N99 10mm pistol featured in both fallout new vegas and fallout 3 , it has a silencer attachment , a normal and a extended mag and it comes with its own stand, i keept the pistol petty much like the original except for the grip since it was not human hand compatible and it defied the laws of phisics .

This model has a working trigger , a working slide , a working magazine catch and the silencer can be easly screw in.

For assembly.

First of all the things you are going to need:

• A fast glue with acelerant preferably , some normal glue with some tweezers or a lot of patience can work too.
• x1 Spring 33mmx9mm 
• x1 Spring 36mmx5,5mm (A spring from a pen can do the work)
• x1 Spring 17mmx5,5mm (Another spring from a pen can work for this too)

• Some string from filament to make tiny cuts out of it.

   

This model uses bits of 1,75mm filament to use as guides like in the image.

The first part that matters when should be assemble its the trigger/triggerguard and you should start by it before gluing the trigger guard to other things , the 17mmx5,5mm spring goes in here.

You put the pieces togeter and insert the spring , since the spring is under tension the parts are going to want to come out , this is were you use the fast glue or some tweezers if you have them , if you berify it works you can continue.

The second part its the mag weld and mag release , this is where the 36mmx5,5mm spring goes.

You should introduce first the spring and then the magazine release into the hole , the you are going to press the magazine release and insert a mag , the mag release should stay in place holding the mag , then you can glue the pattern panels on the sides of the grip , after the glue as dried up you can press the mag release and take the mag out.

Afther this you can start assembling the rest of the parts using glue but left the slide for last since its not glue to the rest.

For this part that is the more tricky you are going to need the last spring to put in here , there space for two springs but i find out tha only one works great.

First i insert the slide , then put it back and sligtly up and the with the fingers try to insert the spring in the top position , the pressure from the spring should close the slide by itself , that should be it.

Of course if you dont want to do any of that and only put in the stand or you lack some of the spring just gluing everything together its always an option.

If you have any problems with the model douds or suggestions, don't hesitate to tell me in the comments.