Re-upload from printables. Original model by LTT.
They are finally here, CPU cases for your organization needs!
Versions Included:
- 17XX holder V9
- 20XX Holder V5
- 115X 1200 holder V8
- AM4 Holder V11
- AM5 Holder V8
Tools required:
Extra Materials:
- 2 x 2D finishing nail 1" (25mm), or other ~1.75mm Rod
Printing:
- Orientation: Flat sides on the bed
- Works well in PLA and PETg.
- normally use: 0.2mm, 0.25mm or 0.28mm layer height
Assembly:
- Place the upper case so that it nests into the lower case
- the hinge holes should be aligned
- Insert nail/rod (point bit first) into hole
- Tap in nail/rod with hammer till nail is seated
- trim excess if desired
Repeat till all you cases are assembled, then happy organizing!
.STEP and .STL files are provided.
Tetra
