HUEFORGE FERRARI F40

Boost MeDo you like my project?
Would you like to leave me a boost so I can always create new things.

HUEFORGE FERRARI F40

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.2mm

 

The Model is 142.86x250mm in size

You may print at higher layer heights below the Min Depth of 0.2mm The Max Depth is 2.1mm and the Actual Depth is 1.7mm

 

Filaments Used:

PLA BambuLab Basic Jade White Transmission Distance: 5

PLA BambuLab Tough Black Transmission Distance: 0.6 

PLA BambuLab Basic Red Transmission Distance: 4
PLA Kexcelled Orange Transmission Distance: 8

 

This print uses 4 unique filaments

 

Swap Instructions:

Start with Jade White

At layer #7 (0.68mm) swap to Black
At layer #9 (0.84mm) swap to Red
At layer #15 (1.32mm) swap to Orange for the rest.