Portable Laptop Stand for Travel Plus 便攜式筆電支架加強版

Boost Me

I don't understand why some people are having support issues — sorry, but they haven't provided very good feedback.

I suspect there's something wrong with their support interface — either they’re not using a dedicated support material, or they’re not using PETG as a support interface for PLA.
If you don’t apply this printing technique, having the support interface and Z distance set to 0 in my print configuration will make the supports impossible to remove.
You’ll need to adjust this setting — specifically the support interface and Z distance.

 

我不明白為什麼有些人會遇到支撐問題，抱歉但他們沒有很好的回饋資訊。

我懷疑他們的支撐介面沒有使用支撐專用材料或是使用PLA對PETG異材質應用。如果沒有使用此列印技巧我的打印配置中支撐介面與Ｚ距離為0將會使支撐無法拆除。

 

 

 

This model is an upgraded version of my original Portable Laptop Stand for Travel model, with several different upgrades

1. Use carbon fiber effect version.

2. Use the ironing function.

3. A small hook is added to the model to prevent the laptop from sliding out.

4. The model is enlarged to accommodate larger laptops.

5. Use 4 stronger magnets 30x10x3mm to achieve good results.

The size of 30x10x3mm is designed according to the materials in Maker's Supply

Please pay attention to the polarity when placing the magnet

 

此模型為原本我的Portable Laptop Stand for Travel 模型的升級版，幾個不同的升級

1.使用碳纖維效果版．

2.使用燙平功能．

3.模型增加小勾防止筆電滑出．

4.模型加大可適用更大的筆電．

5.使用更強的磁鐵30x10x3mm 4個即有很好的效果．

30x10x3mm的尺寸是依照Maker's Supply中的材料設計

放入磁鐵時請注意極性