Toploader Wall Frame - 4x TCG Card Holder

This frame makes it convenient to display 4 of your favorite standard sized cards from Pokemon, MTG or other TCGs. The cards are safely stored in toploaders before being slid into the frame, so no worry about the frame damaging cards. 

Here are the sets for construction. 

1. Print all 3 plates
2. Snap the 4 card holders together. I recommend starting where the two thin edges meet (the opening) and then snapping it towards the bottom. 
3. Slide your cards (in toploaders) into each of the 4 holders. 
4. Rotate the screws on the back of the frame 90 degrees so that the “tooth” of the screw is hidden. 
5. Drop the holders into the main frame from the front. 
6. Hold the frame over your head so that the front faces up. Turn each screw 90 degrees. Now the holders should be secure in the frame.
7. Hang your framed cards!

If you enjoyed this model, consider checking out my other TCG card holders:

https://makerworld.com/en/models/238358?from=search#profileId-254244

https://makerworld.com/en/models/388591?from=search#profileId-289424