Fully Articulated Titan Man V2 Action Figurine

Prepare your printer before printing!

Model contains small parts, make sure you have prepared your printer before printing. 

• most important - wash your build plate - use dish soap and warm water to carefully clean surface of build plate, use kitchen paper towels to dry build plate, make sure not to touch printing area with bare hand after cleaning. 
• make sure to use proper and tested filament print profile and don't change downloaded printing parameters. Good cooling is crucial to provide satisfying and perfect results, make sure to leave turned on plate leveling, it provides best first layer and it's crucial for adhesion of printed parts
• if you want to be super prepared, use dynamic filament pressure advance calibration or calibrate your filament/use pre calibrated settings.

With that, it's impossible to have any printing failures. I have printed this model over 10 times after final release and multiple times during development, I have not encountered even once printing failure, prepared print profiles have even additional print failure preventions, it should print successful even with brims turned off, yet left them for best possible results. 

Please, make sure you have prepared printer before printing and use good quality filaments. It's really not fault of print profiles if there is any part that comes off build plate.