Glasses Wall Mount Holder

Have a look at my other related models. Here is one I recently created. A glasses cover that is print-in-place and requires no magnets.

https://makerworld.com/en/models/1579324-compact-glasses-case-with-spring-button-pip#profileId-1661922

------------------------------------------------------
 

Update 4: If you have larger glasses (Sports/workglasses). There is a larger model specially for them here.

https://makerworld.com/en/models/518837#profileId-435162

Update 3: Added a version that can be mounted to IKEA Skådis. It can be found on the following link.

https://makerworld.com/en/models/400690#profileId-302203

Update 2: Added a version with holes to attach with screws (V7)

Changes:

• Countersunk holes added to attach with screws instead of 3M tape.
• The back wall is 1mm thicker to compensate for the holes.

Update 1: Added a newer version (V6)

Changes:

• The middle wall height has been increased by 4mm.
• The fillets at the bottom of the model has been decreased to minimize overhangs.

Simple glasses mount for walls or cupboards. You can resize the model in the slicer to fit your glasses.

Open for comments and suggestions.