Elden Ring Hookclaws

This is an attempt at modeling the hookclaws weapon from Elden Ring. 

Hardware needed per claw (you will need 2x for the set)

3x - M5 Nut

2x - M5x110mm Bolt  (for mounting blades to top)

1x - M5x95mm or M5x100mm Bolt (for mounting handle)

You should be able to find M5 nuts at any local hardware store. The bolts you will probably have to find online somewhere. I got the M5x110mm from Amazon and the M5x95mm from McMaster-Carr. M5x100mm should be easier to find and probably fits a little better, the M5x95mm are almost too short it barely reaches the nut.

I used the Blue Gray filament for the blades and the Bronze filament for the handle. Wood PLA might look nice for the handles as well.