Kids Toy Hammer

MembershipWant to sell physical prints of this model? Commercial selling is available through my Commercial Print License membership. Join the tier to sell finished 3D prints of this model while your membership is active. Digital file resale, sharing, redistribution, or remixing for resale is not allowed.

Here is a toy hammer I designed in Fusion. This is on my journey to finish a complete toy construction set for my grandson. I would suggest to thread the screw into the handle without the head to make sure the threads engage and that its not too difficult to thread in when the head is attached. I have provided a phillips slot on the top of the screw, but it should only be used if the screw threads into the handle semi easily. I hope you and your kids enjoy!

 

---- Update 9/19/2025 -----

 

Looks like the original updoad was missing supports for the head/handle and a brim for the screw part. Originally these were added and uploaded. I heard that during a site migration or update a while back that some models were affected. I have added the supports and brims back and re-uploaded the model so it should work now. Appologies for not checking all my models before hand. 

 

• I know its difficult to check for supports and brims on a mobile device through the handy app, but if a print fails, always check the desktop slicer prior to printing to help with failures. Also please make sure your print plate is clean and free of any debris prior to printing.