MakPac Name Plate

As I was transferring all my power tools to the very convenient Makita MakPac system I thought it would be handy to know what's inside these anonimous boxes.
I could have made a bunch of stickers, but where's the fun in that….
So searching the intenet for the the Makita font I found the Mikita font. 

It is very close to Makita, but without the copyright :-)

Though it is a Through Type Font I was unable to use it in Bambu Studio.

Next best was making the separate name plates in my design software and switch filaments at a certain layer.

• To attach the name plates either use a contact glue or double sided tape.
• The are two sizes of the nameplates. Front and back plate is slightly wider than the side plates.
• If you use an A1 Mini, not all 4 nameplates will fit on the plate, so you'll have print them in pairs.
• The No AMS print profiles have an added pause at the layer where you should change the filament color.
• Designed for the Makita MakPac boxes, but it will also fit the Festool/Festo boxes.

The fixed names print profile include:

• Jig Saw
• Router
• Router Bits
• Belt Sander
• Plunge Saw
• Planer
• SDS Plus Rotary Drill
• Cordless Drill
• Multitool
• Circular saw
• Drill and Impact Driver
• Angle Grinder
• Batteries
• Drills Taps
• Reciprocating Saw

June 17 2025 - New additions:

• Battery Charger
• DA Sander
• Drill Bits
• Polisher
• Sander
• Sandpaper
• Torch

June 24 2025 - New addition:

• GRR Ripper

May 23 2025 - New additions:

• Detail Belt Sander
• Stapler
• Rotary Hammer
• Lights
• Finishing Sander
• Orbital Sander
• Compressor
• Caulking Gun

If you want a nameplate not listed above, then drop me a line and I will add it. (But I will only do the English names)

I did include a customizable name plate, but with a different font. (The font I used for the fixed names does not work in Bambu Studio)

To modify the name in the customizable print profile:

On the left next to Process select Objects.

Then select text_shape from the list.

After this, go with the mouse pointer to the text on the model and right click.

Now you can select Edit Text.