HEAT Pedal to the Metal Insert (+HR + TV +RR)

Heat: Pedal to the Metal – Ultimate Insert v1.2  

Fits 3 expansion with lid lidft or 2 expansiosn with No Lid Lift

This is an updated version of the insert, bringing improvements while keeping the core geometry unchanged, so if you’ve already printed v1.0 or 1.1, you don’t need to reprint everything (or anything at all, changes are cosmetic, or additive), but I recommend that you print the higher map spacer!

What to expect in v 1.3

Once I get my hands on Legends I'll re-assess the insert. I want to keep the map layer, and the car layer, so I see a couple of options moving forward:

1. Redesign the bottom layer to accommodate all cards and components (optimistic, but would be nice)
2. Keep the bottom layer as is, and make some side boxes (sideways, next to the maps) to store the new content
3. A combination of 1 and 2, whatever feels most logical to me.

Feel free to share your ideas - I read every suggestion and genuinely take them into account.

I'm really happy with the car layer, so I'd prefer not to redo it - even though I could technically squeeze 3cm out of it (e.g., for horizontal trays). My gut says it'll end up feeling cramped rather than clean.

What's New in v1.2

• Rocky Roads support added. The cards fit medium sleeves (I use Arcane Tinmen), though you may need to be a little creative with how you stack.
• The extra compartment has been dropped to make room for the white Rocky Roads car and its cards.
• A higher corner spacer has been added, to support the new map (causing lid lift)
• With all three expansions, the extra Rocky Roads map will cause a small lid lift (equivalent to one map). You can also store it in an expansion box if you prefer a flat lid. My take is more space efficient.
• If you own 0-2 expansions, the freed-up space works well for storing extra tokens or other game accessories.

What’s New in v1.1

✅ Adaptive layer height – Smoother prints while keeping print times efficient.
✅ New color profile – Designed to match the HEAT color scheme for a cohesive look.
✅ HEAT stencils added to all components – A more thematic finish for the insert!

Print It However You Like

• Use my color profile to match the HEAT color scheme, with top layers
• Print the player trays in player colors for a personalized look.
• Or just go with plain grey or your favorite color — it still works just as well!

The following description remains the same as v1.0:

Tired of lid lift or messy setups with Heat: Pedal to the Metal and its expansions? This fully modular 3D-printed insert is designed to fit the base game + Heavy Rain + Tunnel Vision while maintaining a compact and efficient layout.

Key Features:

• A Grow-Into Insert 🏁
  • You don’t need to replace the whole insert when expanding your collection.
  • Simply swap out the board spacers as you add Heavy Rain and Tunnel Vision.
  • Works perfectly for any collection size—whether you own just the base game or all expansions.
• Layered System for Faster Setup & Teardown:
  • Bottom Layer (Cards & Components):
    • All shared cards and tokens are stored here.
    • Heat & Advanced Upgrades are split to keep stacks low.
    • Card trays print in two parts – simply snap them together (no glue required).
    • Designed for sleeved cards using American Standard Sleeves (tested with Arcane Tinmen Medium Non-Glare sleeves).
  • Middle Layer (Player Trays):
    • 8 individual player trays for gear, racing car, and deck.
    • Custom gear holder maximizes height usage while keeping the trays low.
    • One extra tray (9 slots total) for custom components like a start/finish arch (this model).
  • Top Layer (Boards & Manuals):
    • Stored in order: Maps (race boards) → Manuals → Player boards for easy access.
    • Includes modular spacers to fixate the boards, preventing movement.
• No Lid Lift – Everything Fits Perfectly
  • Designed to hold all expansions without raising the lid.
  • Chamfered edges ensure each layer locks into place securely.
• Multiple Spacer Options for Board Storage:
  • 4-Corner System (for different collection sizes: No expansions, 1 expansion, or both).
  • 1-Corner System (simpler and more practical when using all expansions, reducing parts).

Print & Assembly:

• Card trays print in two parts – simply snap them together (no glue required).
• Print the spacers that match your expansion setup.
• Designed for PLA printing.

This insert is built for gamers who want a clean, expansion-ready, and easy-to-use storage solution. Start with the base game and expand as you go—without ever replacing the insert. Enjoy faster game nights with a streamlined setup & teardown!