March 8, 2025
Description
3d miniature of Philadelphia, Pennsylvania!
This miniature has been completely re-created for improved printability & full Multi-Color support! 🎨
Check out my collection of other miniature cities:
https://makerworld.com/en/collections/146964-all-miniatures
Collection of other Multi-Color miniatures:
https://makerworld.com/en/collections/5329261-multi-color-miniatures
Filament colors used in the model photos:
These colors are based on personal preference and the filaments I had available.
Try experimenting with different color combinations to suit your style!
I highly recommend Matte filaments!
This model looks great even if printed with a single color, so an AMS is not necessarily required.
This model was designed to be printed with a 0.4mm nozzle and 0.16mm layer heights.
Try using a 0.2mm nozzle (0.08mm layer heights) or scaling up for even finer detail!
Note: If roads or other small details disappear after slicing, try lowering the extrusion/line width of external perimeters (outer walls) closer to 0.4mm OR use Arachne walls (can also enable “Detect Thin Walls”).
This model measures almost exactly 6.7in by 4.7in (170.5mm X 119.5mm) and should fit most 5x7 frames (assuming frame lip/overlap is around a quarter inch). Feel free to change the scale/size of the model(s) to meet your needs.
Personally I use these cheap frames from Amazon: https://www.amazon.com/dp/B0C8HY7YSQ
And blue printer paper: https://www.amazon.com/dp/B00006IDQT
I also included a fully printable frame (including a 1mm thick water plate) designed to fit all my miniature cities.
A frame is not required! This model looks great by itself and can be displayed almost anywhere.
MembershipSubscribe for a Commercial License to sell physical prints of my models! License stays valid as long as the subscription is active.
License:
Standard Digital File License
jarvizar
