AR 2

Owerwatch standard issue sterilization equipment, also referred to as Pulse Rifle by anti-citizens.

This remix adds to the original design a major overhaul in strength and assembly. Adding 6 furniture wood dowels and total of 57 screws and threaded inserts to hold the finished weapon together.

Assembly
A word of caution: This is a hard model to put together. Putting this model together will require some skill.

Better assembly guide with marked places for screws and inserts is currently being worked on.

For now you have to consult the “AR2 Assembly Example” file in STLS of this model and look at its parts in Blender or Slicer. Wooden dowels placements are for now shown on the picture of this model. Threaded inserts and screws can be avoided by using only glue, but i don´t recommend it. For securing wooden dowels I recommend using a “white” construction glue (the one with substance of a toothpaste) and superglue for everything else.

Part list:
M3x8       (phillips round head)           15pcs
M3x10     (phillpis tapered head)        5pcs
M3S         (threaded inserts)                20pcs
M4x8       (phillips tapered head)        3pcs
M4x10     (phillips round head)           3pcs
M4S         (threaded inserts)                 5pcs
M2x5       (phillips patered head)         2pcs
M2           (threaded inserts)                 2pcs
Standar drywall screw 25mm              2pcs
 

8mm wood dowel for furniture         1m stick
cut into:
29cm (top body rail)
36cm (body to stock)
26cm (bottom body rail)
7,5cm (underbarrel trough mag)
3,5cm (magazine side, 2pcs)
13cm (pistol grip)