TRX4M offroad cargo truck - roof box

Roof box add on adpated from the original 1:10 scale model to fit the TRX4M verison, both linked below.

TRX4M version: https://makerworld.com/en/models/836971-trx4m-offroad-cargo-truck-body#profileId-782454

Original version: https://makerworld.com/en/models/556645-armadillo-off-road-truck-display-car-or-rc-body#profileId-475535

Roof box assembly is glued on to the cab. Prior to glueing, all accessories can be screwed on to the roof box using M2x4mm screws, (plus two M2x6mm to attach the roof hatch to the hinge), or just glue in place. The hinge can be quite delecate (should be fine once the bolts are in place) so take it easy, you can try to open the holes slightly using a small drill bit (less than 2mm) if you're struggling to get the screws in without breaking it.